Home » General Contractor

Category Archives: General Contractor

Generator Installation – The First Steps

The first step in a generator installation is to secure a location for the unit. Your contractor will work with local authorities to get the proper permits.Generator Installation

It is also important to take inventory of your appliances and equipment, so the electrician can determine the correct size generator for your home. This process takes into account both running and starting watts. Contact Generator Installation In Spring TX for professional help.

Getting your generator installed in the right location is important for both performance and safety. If the generator is not located correctly it could cause a dangerous short circuit, which can lead to electrical fires or other problems. A home consultation with the electrician helps you pick out a place to install your generator. Some locations may require a permit or special construction. The generator must be located at least five feet away from doors, windows, vents and other combustible walls. Some cities have specific ordinances and some homeowners’ associations (HOA) have restrictions on the placement of generators.

In addition, the generator should be placed somewhere that does not flood. It should also be accessible for routine maintenance, which can be done without removing the unit. And although generators get quieter with each generation, they still make a lot of noise when running, so you’ll want to find a place that will reduce the impact on your neighbors.

We’ll need to install a transfer switch so the generator does not back feed onto the electric grid when power is restored. This can cause damage to your generator, as well as fires or electrocution of utility workers trying to restore electricity. The transfer switch also ensures the generator only powers your home, rather than the entire neighborhood.

Once we’ve determined the best spot for your generator, we will lay a concrete pad. This prevents the generator from sinking into mud or snow, which can interfere with its operation. We’ll also install a drain so the generator doesn’t leak water or gasoline.

It’s helpful to keep in mind that the more you do for your generator during installation, the less work it will need to do when the time comes to use it. That’s why it makes sense to take the extra steps to prepare for the emergency power need and maximize your investment. With a little planning, you can be ready for any power outage and have peace of mind that your generator will be up to the task.


If you want to be prepared for an outage, a backup generator is a good idea. But before you can use it, you need to make sure that your home is properly protected and that all the necessary paperwork has been filed. This includes permits, inspections and a warranty. It’s important to use a professional that is familiar with the complex legislation and building codes relating to generators. A licensed electrician is the best option because they can handle all of these details for you.

The first step is to get a permit from the local governing body. Typically, this involves filling out an application and paying a fee. The permit should state all the work that will be performed on your property. It will also include a list of required materials and items that must be available to city field inspectors.

You will also need to submit an electrical plan and a gas fuel line plan. Both of these should provide a detailed diagram of the entire installation, including all conductor sizes and transfer switch characteristics. The electrical plan should also provide one-line electrical drawings, load calculations, and the generator and transfer equipment specs.

A separate gas fuel line is needed to connect your generator to the natural gas supply. The plan should detail the gas fuel piping and the shut off valve for this line outside of your house. The gas fuel piping should also be sleeved if it penetrates the foundation wall. The plan should also indicate the minimum setback to the side and rear lot lines, as well as the clearance to the home’s ventilation openings and windows.

If the generator will be installed in a flood zone, an elevation certificate must be included with the permit application. In addition, you will need to check HOA restrictions for your area before installing a whole-home generator.

You will also need to contact the local Miss Utility line 48 hours before digging, since it’s likely that you’ll have to dig a trench in order to install your generator. This allows the state to mark the location of underground utility lines before you start your project. Attempting to dig without first calling Miss Utility could lead to severe damage, so it’s important to follow this law.

Concrete Pad

A concrete pad is the foundation that industrial generators rest on, providing a solid, stable base for heavy equipment. Without one, there is a risk that the generator could shift or settle over time and compromise operational integrity. It also makes it easier for maintenance staff to access the equipment for routine checks and repairs.

The construction process of a concrete generator pad can be complex and requires the assistance of licensed professionals who understand the proper techniques to ensure a sturdy foundation. It includes preparing the ground, creating forms, pouring the concrete and allowing it to cure for several days before it is ready for your generator installation.

In addition to being a strong foundation, the right concrete generator pad can absorb vibrations and reduce noise pollution from the unit. Vibrations can damage the generator itself and disrupt the surrounding environment. A concrete pad can help reduce these vibrations, extending the lifespan of your equipment and keeping your neighbors happy.

Choosing the right location for your concrete pad is essential. The area must be able to support the weight of your industrial generator and stand up to weather conditions, such as snow, rain and flooding. The soil should be stable, not prone to sinking and free of rocks, sand and dirt that could harm the generator.

When planning your concrete pad, consider any conduits that will need to be run from the equipment. Sketch out your site and plan accordingly. Make sure the conduits are clearly outlined and positioned correctly to avoid any issues down the road. For instance, the junction box location may need to be placed in a different area than where the tank is positioned. If this is not taken into account, the tank may cover up the conduit and render it useless.

Moreover, the concrete pad must be expertly constructed in terms of thickness. If the concrete is too thin or thick, it can crack under the pressure of your generator’s operations and lead to costly repairs or legal & regulatory issues. It’s important to work with a reputable, experienced contractor that will handle all permit requirements and inspections for you.

Electrical Connections

In order to provide backup power during an outage, a generator needs to be connected to your home’s electrical system. This is typically done via a transfer switch or a generator breaker panel. A licensed electrician like the certified professionals at Stan’s will install the necessary components to ensure that your generator system is properly integrated into your house’s electrical infrastructure. The transfer switch will shift your home’s current from the utility to the generator, while the breaker panel will send electricity to specific circuits of your choice when needed during an outage.

The location of your transfer switch and breaker panel will affect the total cost of your standby generator installation. The best option is to install them near the electrical panel, as this minimizes the amount of electrical cable that must be run from the generator to your house. However, this requires that the electrical panel be upgraded with a subpanel, which can add up to $1,230.

If you prefer to skip the electrical panel upgrade, a transfer switch will still need to be installed at your house. There are several ways to do this, but the most common is to install an automatic transfer switch that will automatically detect a power outage and switch your house to generator power. There are also manual switches that allow you to manually switch the power source yourself.

The electrician will then wire the switch to your breaker box, and connect it to the generator. It’s important to use the right size of cables for the job, so that your generator can handle the peak load when needed.

Electrical connectors should be rated for the cable’s voltage and current, and should have sufficient insulation to prevent electrical hazards. They should also be resistant to corrosion and environmental factors such as moisture, heat, and dust.

After the electrical connections are complete, the installer will test and commission your generator system. This will include testing the generator under load and simulating a power outage to ensure that it functions as intended. Then, they’ll hook up your fuel source and install exhaust systems as needed. Finally, they’ll start the generator and show you how to use it.